Four pump families and a complete wet-end spare parts program — each engineered to the dimensional and material standards of leading OEM slurry pumps for drop-in replacement.
Narrow down by duty, model series or wet-end material — pumps and replacement parts included.
Horizontal
Heavy-duty centrifugal pumps for mill discharge, cyclone feed and tailings. MHM / MHR / MHH / MM / MR / MLM / MLR series.
View horizontal range →
Sand & Gravel
High-volume designs for dredging, sand, gravel and coarse abrasive slurries. Interchangeable with Warman® G / GH series.
View sand & gravel range →
Vertical
Sump and tank-mounted designs for dewatering, sump and tailings duties. Interchangeable with Warman® SP / SP(R) series.
View vertical range →
Submersible
MSP electric submersible units for pit dewatering and abrasive sumps where a dry-installed pump is impractical.
View submersible range →Matec pumps are dimensionally interchangeable with Warman® slurry pumps.
Cross-reference Matec series to the equivalent Warman® series below.
| Matec series | Warman® equivalent | Duty / size range | Typical materials |
|---|---|---|---|
| MHM / MHR→ | AH / AH(R) | 1.5/1 – 20/18 · heavy-duty mill discharge, cyclone feed, tailings · metal & rubber-lined · the most popular centrifugal slurry pump series, wet-end parts interchangeable with Warman® AH | A05, A07, R55, R26, PU, composite |
| MHH→ | HH | 1.5/1 – 8/6 · high-head, long-distance transfer | A05, A07 high-chrome |
| MM / MR→ | M / M(R) | 10/8 – 12/10 · medium-duty horizontal process transfer · metal & rubber-lined | A05 high-chrome, rubber |
| MLM / MLR→ | L / L(R) | 50 – 650 · light-duty horizontal process transfer · metal & rubber-lined | A05 high-chrome, rubber |
| MVM / MVR→ | SP / SP(R) | Vertical sump, pit dewatering, tank transfer · metal & rubber-lined | High-chrome, rubber |
| MG / MGH→ | G / GH | High-volume sand, gravel and coarse solids · metal & high-head | High-chrome |
| MSP→ | — | Submersible slurry pump for abrasive sumps and ponds | High-chrome wet end, Q235 / 316 motor housing |
| MHF→ | AHF | Froth duty slurry pump for flotation circuits · handles aerated, frothy slurries | A05, R55 rubber-lined |
Independent manufacturer note. Matec is an independent aftermarket manufacturer and is not affiliated with Weir Minerals or any OEM. Warman® is a registered trademark of Weir Minerals; references are for dimensional and material compatibility identification only.
Complete wet-end spare parts in high-chrome, rubber, polyurethane and composite.
Available individually or as full replacement kits, dimensioned for drop-in use.
High-chrome white iron wet-end parts for abrasive mineral slurries.
View range →
Natural & synthetic rubber liners and impellers for corrosive and fine-particle duties.
View range →
Erosion-resistant PU for tramp-material and fine abrasive duties.
View range →
SiC ceramic wet-end parts for fine-particle, abrasive & corrosive duty.
View range →
Key wear component; supplied in A05/A07, rubber or PU to match duty.
Request quote →
Stationary casing liner protecting the pump body from abrasion.
Request quote →
Front and back liner sets for the wet end.
Request quote →
Centrifugal sealing components reducing leakage at the stuffing box.
Request quote →
Rotating and support components for the power end.
Request quote →
Matched kits for fast, single-source change-out.
Request quote →Send us your flow, head, slurry density and solids size — our engineers return a matched recommendation.
Request Engineering Support